HOME · ABOUT US · NEWS · CONTACT US

Metalworking <<Prev   Page  1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next>> Metalworking   Woodworking Attachments & Accessories   MADE IN THE USA CM-M70    Spindle Extension Extends wheel out 1 1/2" (38 mm).  Needed to sharpen roughers, chip breakers and fluting.  Works in conjunction with Z-axis and 6" dish wheels.  Will need to order when ordering CM-15 Z-Axis and/or 6" dish wheels.  Recommended for CUTTERMASTER use only. CM-05P    Dual Positioning Pneumatic Finger Cuts sharpening time in half; eliminates the need for raising and lowering the grinding spindle.  Simply flip the toggle switch to go instantly from primary to secondary clearance angle.  Automatically adjusts the clearance angles for every end mill.   As the crossfeed dial moves the finger adjusting by the size of the tool, it positions tool to correct grind position.  For use on CUTTERMASTER air bearing only.   T-slot, mounting bracket, hardware and carbide stylus included. click to enlarge CM-16    Universal Grinding Fixture Sharpens the ends of an end mall, gash, chamfer, index, and cam relief all with one fixture.  Sharpen the ends (primary, secondary and gashing) of the end mill; use an adjusting cam relief for counterbores, taps, countersinks, reamers, most everything with indexing and relief.  Fixture sits on top of a 360 degree swivel base with 180 degree tilt.  Lock-down cam position helps dial in correct relief for both right hand and left hand tools.  For use on CUTTERMASTER and other tool and cutter grinders.   Internal 5C collet draw bar and 12 index collar included.  Various index collars available. click to enlarge CM-17 Extended Length Draw Bar recommended to be used with CM-16, see below. CM-17    Extended Length Draw Bar Draw bar with added length allows you to index quickly from the back of the CM-16 unit instead of the front - giving you more freedom and time sharpening tools.  Highly recommended when buying universal grinding fixture.  For use on CM-16 universal grinding fixture only. Metalworking <<Prev   Page  1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next>> Copyright © 2010 Conquest Industries, Inc. All rights reserved 12740 Lakeland Rd., Santa Fe Springs, California (CA) 90670 Phone (800) 368-2278 - Fax (562) 906-1112 Located in Los Angeles County USA