HOME · ABOUT US · NEWS · CONTACT US   



















Metalworking <<Prev   Page  1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next>>

Metalworking   Woodworking

Why Your Company Benefits When
Buying a CUTTERMASTER Tool and End Mill Sharpener
 
MADE IN
THE USA

  • Gain the ability to sharpen end mills and all of your cutting tools in-house, the way you want them. Adjustable head allows you to sharpen any and all angles - even for the toughest materials.


  • It keeps your machine tools running. You can't afford to let a major investment like machining centers sit idle for lack of a sharpened cutting tool. Every second that you lose in downtime is a drain on your cash flow.

  • Enable your machine tools to run at peak performance. Sharpen end mills and cutting tools, allow maximum machining rates as well as generating less heat while cutting.

  • Get more machining time out of your cutting tools. Having the ability to grind your own tools right on the spot will keep you from pushing them until they chip or break which means money saved on cutting tools.

    Z-Axis (CM-15)
    Required to sharpen roughing end mills
    (Please see following pages for machine packages and more accessories for more capabilities)
  • Reduce tool crib inventory and save money.

  • Eliminate regrind bills and save even more money.



    Specifications:

    Air Bearing Fixture: 10.5"
    Cutting Tool Capacity: 2" (50 mm) shank
    9.8" (248 mm) O.D.
    10.5" (266 mm) flute length
    T-Slot Dimension: .800 x .500 x .670
    Table Feed Graduations: .001" (.02 mm)
    X-Axis Table Travel: 6" (152 mm)
    Y-Axis Table: 3" Plus Motor Slide of 6" (152 mm)
    X-Axis Working Space: 16.5" (419 mm) x 5.5" (139 mm)
    Y-Axis Travel Working Space: 13" (330 mm) x 5.5" (139 mm)
    Wheel: 5" (127 mm) Cup or
    6" (152 mm) Dish with Z-Axis, arbor 1¼" (32 mm)
    Motor Tilt: +35/-8 degrees
    Motor: 1/3 hp
    3450/2850 rpm
    110v/6-hz or
    220v/50hz
    Net Weight: 232 lbs. (108 kgs)
    Machine Dimensions:

    Shipping Weight    		 30" (762 mm) x 28" (711 mm) x 29" (736 mm)
    275 lbs (without accessories)



    • Metalworking <<Prev   Page  1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 Next>>
    Copyright © 2010 Conquest Industries, Inc. All rights reserved
    12740 Lakeland Rd., Santa Fe Springs, California (CA) 90670
    Phone (800) 368-2278 - Fax (562) 906-1112
    Located in Los Angeles County USA